Koch Industries / Georgia Pacific
170 Shattuck Way
Newington, NH   03801 United States

11/2011 – Present

Knife Operator: Lockout / Tagout Certified

Responsibilities:

Program knife blade speed ratio, blade depth, blade offset, cut spacing and board grouping to meet product specifications.

Pull test sample every 30 minutes to perform 21 point quality assurance tests including but not limited to: width, weight, positive & negative angles (steel protractor), front & back bonding, front & back paper alignment, 13 point calibration (digital micrometer), facial defects, Voids, Hollow Edges, End Lift, End Shatter

Communicate any anomalies or variations to Mixer Operators so they can make needed corrections prior to board getting to Knife.

Communicate any anomalies or variations to Dryer Operators and Take-Off Coordinator so they are aware of any board that may need to be rejected.

Perform preventative maintenance on Live rolls, Knife, Grouping tables,
On rolls, Wet transfer belts, Inverter arms, Off rolls, and Return conveyors 1-5.

Assure all equipment and tools are kept organized, clean and in good working condition, perform HK on a daily basis in and around knife area encompassing about 24,000 sqf.


Riser Operator & Cutback Saw: Lockout / Tagout Certified

Responsibilities:

Cut risers to predetermined specifications that will be use for spacing between the lifts of board prior to storage and shipping.

Perform preventative maintenance on Vacuum lift, Skate rolls, Shear press, Layer Pusher Glue quills, Board press, Saws, Pinch rolls as well as scissor pallet table.

Perform HK in and around Riser area encompassing about 1500 sqf.


Paper Operator: Back-Up Only - Not Lockout / Tagout Certified at this time

Responsibilities:

Stage, prepare and hang paper rolls (1600 lbs to 6000 lbs)

Prepare paper alignment and tension for seamless splicing from one roll to the next for contiguous runs with zero splice failures.

Monitor chop (fiberglass chop) tank status and trending so proper ratio of chop is
integrated into the product through the mixer adhering to Master Formulations.
Fill chop tanks as needed.

Assure dry additives such as Boric Acid, Sugar and Pot Ash are added as need to
maintain proper levels in the Mill system.

Keep inventory of Boardline Glue, Dens Glue, Boric Acid, Chop, Vermiculite, Soap, Silicon, Siliconate, Sugar, Pot Ash



DDP Curtain Painter: Operate Dens Deck Prime Curtain Coater

Responsibilities:

Attach and secure all hoses and electrical connections

Stage paint mixing totes (2000lbs) and add water at proper ratio to assure viscosity adheres to master formulation

Adjust Frequency Drive settings to achieve proper pump pressure assuring paint coverage is even and adequate to meet product specification

Assure scales calibrated and Zahn gauge are kept clean for accurate measurements

Assure all components are flushed thoroughly at end or run to prevent any build up of sediment in pumps or hoses


Other Duties:

HR coordinator for Team 3 (3rd shift)

Backup Training Coordinator for Team 3 (3rd shift)

Prior backup Safety Coordinator for I-Team (1st shift)

Forktruck Operator (various sizes and attachments)

Pallet wrapping machine operator

Perform mechanical work on variety of equipment

Confined space monitoring supervisor

Safety auditor

Inspect 178 Fire Extinguishers monthly (rotate out those that fail as well as those that have reached their end of life duty cycle)

Develop Documentation (JHA, SOP)

Develop & Integrate Excel Spread Sheets for tracking daily production

Training:

OSHA, Forktruck, PLC Introduction (Ladder Logic Programming), MBM (Market Base Management)

Security:

Background check, Drug test (All Clean)

Supervisor: Stephen O'Kresik (603-433-8000)
Okay to contact this Supervisor: Contact me first

University of New Hampshire
10 College Way
Department of Housing
Durham, NH   03824 United States

10/2006 - 08/2011
 

Broadband Technician:

Responsibilities:

Perform daily level checks and modulator adjustments for all channels as needed

Perform plantwide troubleshooting, maintenance and repairs

Maintain a sustainable inventory for both active and passive devices (1GHz Fiber Nodes, RG6, RG11, F81 fittings, 3 pieces Gilbert pin connectors, .540 QR, Pads, EQs, Attenuators, etc.)

Process equipment repairs (remove device, contact vendor, process shipping, process payment, receive device, benchtest device, reinstall and active)

Process out any legacy electronics in accordance with UNH electronics recycling policy

Monitor and process all SMATV maintenance request

Maintain database of all active and inactive ResHall SMATV & Data connections (apx 13k)

Perform routine testing of SMATV cable plant including but not limited to EOL (End of Line), Frequency Sweeps, UPS testing

Back up Card Access Admin (C-Cure 800/8000 Software House)

Administer TFTP & DHCP server for family housing units

Set up & Configure two Arris C3 CMTS units

Administer Solar Winds NPM on Windows 2003 Server with SQL 2005 Express

Design SMATV plant extensions, plant upgrades for building renovations

Maintain & update SMATV plant drawings using MS Visio


Training:

NCTI Jone (Fiber Testing & Maintenance, System Tech, Installer Tech, Service Tech)

Arris (Cadent C3 Quick Start & Operations

Blonder Tongue (Analog & Digital Networking)

C-Cure (800/800 Card Access Installer - Maintainer)

Equipment:

Trilithic 860DSPi SLM, Trilithic Model Two SLM, Trilithic 8300FST, CaLan3010R SLM, CaLan 1777FST, H8591C Spectrum Analyzer, Fluke DSP2000, Tektronix THS720 oscilloscope


Security:

FBI Background check / Holder of Campus Grand Master keys / Card Access Backup Admin

Supervisor: Shawn Kretchmar (603-862-2120)
Okay to contact this Supervisor: Contact me first

University of New Hampshire
Hamilton Smith Hall
Rm 2
Durham, NH   03824 United States

07/1998 - 10/2006
 

ResNet Coordinator:

Responsibilities:

Provide IT technical Support to the 7000+ student living in the ResHalls on the UNH Campus

Primary objective resolving IT issues relating to connectivity, viruses, malware, system updates, hardware troubleshooting as well as ethical behavior while connected to the UNH Network

Hiring of student staff

Training of student staff

Scheduling staff coverage for the two physical walking-in service locations managed by ResNet

Assigning staff and resources to make onsite visits to the ResHalls when students not able to come into either of the service locations

Managing the ResNet case load via Remedy (call tracking software)

Coordinate student & parent orientation programs twice yearly


Training:

Excel, Illustrator, Acrobat Pro, Arcview, Outlook, Visio, Remedy,
Windows (NT, 95, Vista, XP, 2000)

Supervisor: Marshall White (603-862-7000)
Okay to contact this Supervisor: Contact me first

University of New Hampshire
UNH Telecommunications
Telco Building
Durham, NH   03824 United States

07/1996 - 07/1998
 

Telecommunications Technician:

Responsibilities:

Provide Campus wide troubleshooting of both Voice & Data network connectivity and quality assurance

Design, Install and test both Voice & Data network infrastructure for new construction, renovations and existing plant upgrades comprised mostly of UTP horizontal cabling with both copper and fiber backbones

Install, activate and upgrade edge devices

Repair telco splices from 25 pair to 1800 pair; both Aerial and UG

Activate, x-wire and test new service from PBX out to clients desk

Develop proposal, design, cost out and install network infrastructure for remote campus locations (Granite State Learning)

Training:

Seimon Certified Installer, BICSI


Proficiencies:

Most any coring, crimping, splicing and punchdown tools associated with Telecommunications & Networking

Variety of hand held LAN Meters, Bidirectional Testers, & Telco Buttsets

Power puller, Aerial bucket truck

Supervisor: Craig Bisson (603-862-4242)
Okay to contact this Supervisor: Contact me first

English

Advanced

Advanced

Advanced

New England Chapter SCTE - Broadband Technician Training

Tony Ditulio

University of New Hampshire 

System Administrator

603-862-3417

Tony.DiTulio@unh.edu

Marshall White

University of New Hamoshire

INFORMATION TECHNOLOGY MANAGER

603-862-7000

Marshall.White@unh.edu

Kevin Hinchey

University of New Hampshire 

INFO SYSTEM TECH & BUS ANALYST

603-862-0505

Kevin.Hinchey@unh.edu

Chris Pycko

University of New Hampshire 

INFORMATION TECHNOLOGIST II

603-862-0037

Chris.Pycko@unh.edu